Products and Information
B12S Medium Weave Treated Phenolic Cotton Laminate SRBF
Material Details
| Grade: | B12S. (Type: Fabric Based Laminates - SRBF) |
|---|---|
| Description: | Phenolic Cotton. B12S, treated cotton for higher temp & electricals |
| Comments: | Medium weave cotton phenolic laminate with very good mechanical and electrical properties. Suitable for packing blocks in large rotating machines, water lubricated bearings, pump rotor vanes. Very dimensionally stable under adverse conditions. |
| Body Colour: | Sandy Brown |
| Cover Colour: | Sandy Brown |
| Standard Finish: | Satin/Glossy |
| Size: | 1220 x 1220 Thickness Range: 0.8 - 150.0 † |
Typical Applications
- Wear Resistant Components
- Water Lubricated Bearings
- Ventilation Louvre Bearing Brushes
- Slideways
- Seal Rings
- Scraper Blades
- Rolling Mill Bearings
- Pump Sleeve Bearings
- Piston Rings
- Jigs and Fixtures
- Gears - Medium Tooth
- Gears - Coarse Tooth
- Cryogenic Resistance Components
- Chemical Resistance Components
General Properties
| Property | Unit of measure | Typical Value |
|---|---|---|
| Density | g/cm3 |
1.35 |
| Water Absorption | mg |
120 mg |
¥ Where relevant, the flammability test method is used solely to control and monitor consistency of production. Under no conditions should the results be considered in relation to fire hazards under actual conditions of use.
Electrical Properties
| Property | Unit of measure | Typical Value |
|---|---|---|
| IR (24hrs Water Immersed) | G Ω |
0.8 |
| IR (Dry) | G Ω |
0.8 |
| Electric Strength (Flat Rapid) | MV/m |
4 |
| Breakdown Voltage (Edge Step by Step) | kV |
32 |
| Tracking Index | V |
155 |
Mechanical Properties
| Property | Unit of measure | Typical Value |
|---|---|---|
| Flexural Strength | MPa |
110 |
| Tensile Strength | MPa |
75 |
| Impact (Notched CHARPY) | kJ/m2 |
8.5 |
Thermal Properties
| Property | Unit of measure | Typical Value |
|---|---|---|
| Thermal Rating Continuous | °C |
115 |
| Thermal Rating Intermittent | °C |
125 |
Disclaimer: The above values are based upon routine test data and do not form the basis of a supply contract. These products may be used in a diverse range of applications and whilst every effort is made to ensure the information in this data sheet is accurate, it must be stressed that it is the user's responsibility to ensure suitability for the intended end use.